Vizio Tv Shuts Down Suddenly and Have to Unplug Ac and Plug in Again the Start

If your Vizio Idiot box suddenly doesn't turn on, it can exist very frustrating. Ownership a new Idiot box can be expensive, and getting it repaired can exist costly and fourth dimension-consuming.

Don't worry, though. If your Vizio fails to power on, there's no reason to panic. There are a couple of possible reasons why the scenario occurs, and in almost cases, information technology's not due to a broken Idiot box. Normally, it just takes a few minutes and some troubleshooting to become your Tv back up and running.

What to Do if Your Vizio Boob tube Won't Turn On

Before nosotros jump into troubleshooting your TV'south problem, nosotros need to make up one's mind if information technology's getting power or not.

• It'south uncomplicated, bank check the standby calorie-free on your Television to encounter if information technology's on or non. If y'all meet the red indicator low-cal, then that ways your TV is in Standby manner. If you run across so the blue indicator low-cal and in that location'due south nonetheless a blackness screen, and so that means your Idiot box is on only might be on a different input screen or could have an issue with the backlight. If you lot don't see a light at all, so that ways your Goggle box isn't receiving power for some reason.

Troubleshooting a Vizio TV that has the Standby Light On

Here are some potential reasons why your Vizio TV won't turn on even though the standby lite is on.

Stride 1: Check the Remote

If you can't turn on your Vizio TV using a remote, there might not exist anything wrong with the TV at all. Instead, the consequence might be with the remote.

• One of the most common issues is that the batteries are dying or they're already dead. To see if this is the case, effort replacing the batteries and turning the Tv set on again.
• If in that location'due south still nix happening, remove the batteries from the remote and press and hold the Power button on your remote for 15 seconds. After pressing the Power button for 15 seconds, reinsert the batteries and try turning the Telly on.

Troubleshooting a Vizio TV that has the Standby Light Off

If your TV's standby light isn't on, the red lite in the corner that's on even when the TV isn't, then y'all almost probable accept an outcome with a lack of power.

Step 1: Check the Vizio Television receiver's Power Source

To first, checking the power is the next logical step.

• The beginning thing you'll want to do is see if pressing the Menu button yields any results. Sometimes, the Tv set is on but displays a bare screen. Both the remote and the Television set include a Bill of fare button. Try pressing both buttons (not simultaneously) to see if the card pops up.
• If the carte test fails, the TV may indeed be off, and the ability source might be an issue. Ensure that your TV is fully plugged into a ability outlet earlier trying to turn it on again.

Step ii: Check the Condition of the Power Cord

The affair that can often forestall your Boob tube from turning on is a loose or damaged cord. A loose power cord sometimes causes problems for even the nearly technically savvy among us.

• To ensure that the cord fits well, check its connection to both the power outlet and the Goggle box, making sure both connections are plugged in. Fifty-fifty a slightly loose power string connexion tin can interrupt the flow of electricity to your TV, and it's not e'er credible that your TV is unplugged from its power source. Come across if the string is correctly plugged into the outlet. A skilful idea would exist to unplug information technology and then plug it back in to ensure information technology is secure. Another matter you can try is to plug the cord into another outlet.
• After y'all've checked the power outlet in the wall, ensure the string securely connects to the dorsum of the TV. A loose ability wire connection happens more often than you might think, especially if you have children or pets that run around the Television receiver, or you accept a long run to the ability strip. Longer runs mean tighter cords that can loosen when rotating the Tv set or when moving information technology effectually. You can always unplug the ability cord from the Tv set and plug information technology back in to ensure it is fully inserted and secure.

If checking the remote for functionality, testing the TV'due south ability source (outlet), and inspecting the Television set'due south power cord doesn't solve the problem, at that place are a few more things you tin try to resolve the result.

Step 3: Power Wheel Your Vizio TV

If you suspect that yous might exist having power-related issues, the first solution to attempt is power cycling your Vizio Tv set. The process involves using the ability button on your TV. Practise Vizio TVs have buttons? In short, all buttons are found on the back and vary based on the model or version.

The procedure of ability cycling your Vizio Idiot box is straightforward and goes similar this:

1. Unplug the cord of your TV from the outlet and get out it disconnected.
   
2. Locate the power push button on the back of your Vizio TV. The buttons alloy in well, and so you'll need to look closely.
   
3. Press and hold the push button on your Tv for about ten seconds to drain any reserve energy.
   
4. Try turning on your Television receiver again.
   

The preceding steps are likely to work in many cases. If none of the procedures work the beginning fourth dimension, try again, making sure to agree the power button down for at to the lowest degree 10 seconds each time. Often, this will be enough to fix your TV so that y'all tin can go back to relaxing.

Step 4: Call Vizio Customer Support

If none of the higher up tips work for you, it might be time to give Vizio customer support a call. They may provide steps for your particular Vizio Idiot box model.

Calling tech support may fix the problem, but there might exist some other issues with your TV that yous can't fix yourself.

The Vizio customer support team may be able to help you solve the problem by working with you over the telephone or past telling you how to transport in your Idiot box for repair.

Step 5: Replace Internal Components

If you lot sympathize electronics and how they work, yous tin troubleshoot the boards to identify potential power problems.

A Vizio TV that won't turn on is often caused by a declining ability supply board. The most common parts to fail on a ability supply board are capacitors, transistors, and diodes.

If the Vizio Television does accept proper ability outputs, but it'due south appearing to not turn on, then the likely culprit is a bad T-Con board. In brusque, the Timed Controller Board is responsible for relaying signals to the LCD or LED screen. At that place's more to it, but that's the gist.

If you have never disassembled a Vizio Telly or any other TV for that affair, it is all-time to let a certified repair technician handle the repairs for yous. Disassembly is very precise, detailed, and a risk to your safety! Whatsoever wrong move, and you can harm the TV or yourself, peculiarly with all those tight and brittle wire connections and high-power circuits.

Notation: Servicing your Vizio Boob tube is done at your own risk. Box20 and Alphr.com are not responsible for whatever actions or outcomes pursued by the user. Your actions tin can atomic number 82 to electrical damage and possibly electrical shock!

Vizio TVs and the Ability of Troubleshooting

Knowing what something isn't doing, a TV non turning on in this case, is important in determining what the problem is. From there, y'all place the reasons why the problem would arise. Equally you lot probably already know, start with the solutions and so go to the more avant-garde ones.

Practice you have any other troubleshooting tips or suggestions? Delight share them with us in the comments!

sherwinaftiond.blogspot.com

Source: https://www.alphr.com/vizio-tv-wont-turn-on/

Share this post